Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Sylmar, CA
Gate installation in Sylmar usually means one of two things: a heavy slide gate across a long driveway, or a wrought-iron swing gate at a horse property entrance. Most of the work we do in 91342 and 91392 involves custom-built or older gates that need more than a hinge adjustment. We handle the full job from digging the post footings to wiring the operator and setting safety loops. Call us at (833) 696-4511 for a free estimate on any gate project in Sylmar.
Why Sylmar Homes Are Different
Sylmar sits in the hot, dry foothills at the northern edge of the San Fernando Valley, and the gate work here reflects that. Summer temperatures routinely climb past 100 degrees, Santa Ana winds strip moisture from wood, and dust from open land settles into every track and hinge. Wooden gates warp. Wrought iron develops rust faster than it would in the coastal basin. Automatic operators strain under the added resistance and fail sooner than their rated life.
The housing stock tells the same story. Much of Sylmar was built between the 1950s and 1970s, and those original ranch homes often came with driveway gates that are now 40 to 60 years old. Newer tract subdivisions have their own mix of lighter tube-steel gates and builder-grade operators. But the defining Sylmar gate job, the one we see week after week, is the horse property: a long gravel or decomposed-granite drive, a heavy custom gate, and an operator that has been fighting dust and heat for years. These gates need track repair, welding, and motor replacements far more often than a simple hinge fix. That is the work we are set up for.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Sylmar Services
Two services account for most of the calls we get from Sylmar homeowners and property managers: mechanical gate repair for physical damage and alignment problems, and electric gate repair for motor, board, and access-control failures. Here is what each one involves in Sylmar specifically.
Gate Repair in Sylmar
Mechanical gate repair covers the steel and hardware side of the job: broken welds on wrought-iron gates, sagging driveway gates that drag on the ground, bent tracks on slide gates, failed hinges, and gate posts knocked out of alignment. In Sylmar’s heat and dust, we see a lot of track wear on ranch-style slide gates and stress fractures at weld points on older custom gates. We repair the gate in place when possible, and when a post or frame section is too far gone we cut out and replace just that section rather than selling a whole new gate. Learn more on our dedicated Gate Repair in Sylmar page.
Electric Gate Repair in Sylmar
Electric gate repair is motor diagnostics, control board troubleshooting, loop detector calibration, and access hardware replacement. Sylmar’s dust is hard on control boards and safety loops, and the summer heat pushes older motors past their thermal limits on a regular basis. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so if you know the brand on your gate, we can usually tell you over the phone what is likely wrong before we even roll a truck. See Electric Gate Repair in Sylmar for the full breakdown.
Gate Installation in Sylmar
Gate installation in Sylmar is a bigger job than most people expect, and the local conditions make it bigger still. On a 1950s ranch property with a long driveway, a new automatic gate means deep post footings in hard, dry soil, a slide track laid over years of settled ground, and an operator spec’d for heat and dust. In the horse-zoned sections of 91342, the gate often has to handle a 16-foot or wider opening and heavy daily use. We quote the complete job up front and install it as one project, not as a series of surprise add-ons. See our full Gate Installation service details for the process from measure to final programming.
Automatic Gate Installation
Signs you need it
You are manually opening and closing a heavy gate multiple times a day, or you have a gate that was never automated and you want keypad, remote, or intercom access from the street.
What it costs in Sylmar
Automatic gate installation in Sylmar typically runs $2,800 to $7,500 depending on gate width, operator type, and whether power already reaches the gate location.
How we do it
We set the operator pad and posts, mount the operator arm or slide chain, run conduit, pull power and control wiring, set safety loops, and program all remotes, keypads, and access hardware before testing the full open-close cycle under load.
Sliding Gate Installation
Signs you need it
Your driveway slopes upward from the street, you have limited space for a swing gate to arc inward, or you are replacing an old slide gate that has worn through its track.
What it costs in Sylmar
Sliding gate installation in Sylmar generally falls between $3,200 and $8,000, with welded steel frames and heavy-duty rollers accounting for the higher end.
How we do it
We lay a level V-track or flat track on a poured concrete footing, hang the gate with adjustable roller assemblies, set the end stops and catch post, mount the operator, and run safety loops on both sides of the opening.
Driveway Gate Installation
Signs you need it
You want a secure, enclosed front boundary on a property that was built without a driveway gate, or the existing gate is too light for the width and sags or binds constantly.
What it costs in Sylmar
Driveway gate installation in Sylmar costs $2,500 to $7,000 on average, with custom wrought-iron designs and wide ranch openings pushing toward the top of that range.
How we do it
We measure the opening and slope, fabricate or order the gate, dig and pour reinforced post footings, hang and align the gate, then add an operator and access control if the job calls for automation.
What Gate Installation Costs in Sylmar
| Item | Typical range in Sylmar |
|---|---|
| Single swing gate, manual | $1,800 – $3,500 |
| Automatic gate with operator | $2,800 – $7,500 |
| Sliding gate, automated | $3,200 – $8,000 |
How long does gate installation take in Sylmar?
Most residential gate installations take one to two days on site after the concrete footings have cured, which usually adds three to five days depending on summer heat. Custom fabrication can extend the timeline by one to two weeks.
Do you handle the concrete and power for a new Sylmar gate?
We dig and pour the post footings and operator pads, and we run the low-voltage and line-voltage wiring to the operator. If the electrical panel needs a new dedicated circuit, we coordinate that portion with a licensed electrician.
Brands We Service in Sylmar
Our technicians work on our brands including DoorKing, Elite, Mighty Mule, and LiftMaster, which covers most of the operators we see on Sylmar driveways and horse properties. We stock common control boards, loop detectors, remotes, and safety edges, which means many repairs are one visit rather than a diagnosis trip followed by a parts-order delay.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Sylmar, CA
| Service | Typical range in Sylmar |
|---|---|
| Gate repair, minor (hinge, latch, alignment) | $150 – $350 |
| Gate repair, moderate (bent track, wheel, bracket) | $350 – $800 |
| Gate repair, major (weld repair, post reset) | $800 – $2,000 |
| Electric gate repair, basic (remote, keypad, loop) | $180 – $450 |
| Electric gate repair, control board | $450 – $900 |
| Electric gate repair, motor replacement | $600 – $1,500 |
| Gate motor/operator replacement | $1,200 – $4,500 |
| Manual gate installation | $1,800 – $3,500 |
| Automatic gate installation | $2,800 – $7,500 |
| Sliding gate installation | $3,200 – $8,000 |
In Sylmar, two things push gate project costs upward: the heavy custom steel gates common on horse properties, and the extra operator capacity needed to handle heat, dust, and wide openings. Whatever the final number, we quote it in writing before any work starts, and that is the price you pay unless you approve a change in writing.
Neighborhoods We Serve in Sylmar
We cover all of Sylmar including the foothill horse communities, the older ranch-home tracts along Foothill Boulevard, and the newer subdivisions around Olive View. Response time for most gate repair calls in Sylmar is same-day or next-day depending on the time of the call and parts availability.
- Lake View Terrace
- Kagel Canyon
- Olive View
- Sylmar Foothills
- Roxford Corridor
Service Area – Cities Near Sylmar
Beyond Sylmar, our gate technicians regularly work in the neighboring northeast Valley communities. We serve San Fernando, CA, Pacoima, CA, Mission Hills, CA, and Arleta, CA, so if you manage property across city lines you are still working with one gate company.
Serving Sylmar, CA – Our Local Coverage Area
We’re based in the Sylmar area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Sylmar
Yes. If a gate is stuck open, a vehicle is trapped inside, or a property is unsecured, we treat the call as a priority and will give you a realistic arrival window when you call. Emergency service is available in 91342 and 91392, and we carry common parts on the truck to resolve most failures on the first visit.
For most residential gate replacements on the original footprint, no permit is required in the City of Los Angeles. If you are adding a gate where none existed, moving the property line, or adding a driveway entry from scratch, you may need planning review. HOA and equestrian-zone requirements vary, and we can tell you what we have seen on similar Sylmar properties.
We work on horse properties regularly and understand that a gate that will not close is a liability, not just an inconvenience. When you call, tell us the gate’s operating hours and any animal traffic patterns, and we will schedule the repair window around them rather than asking you to keep horses stabled all day.
Call (833) 696-4511 for a free estimate on gate installation or repair in Sylmar, and we will give you a firm written quote before any work begins.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Sylmar Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Vikram Reddy"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Marcy Sutton"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Emily Wong