Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Parts & Welding Cost in Lake View Terrace?
Gate parts and welding in Lake View Terrace typically run $85 to $450 for common repairs, with most single-part fixes like a hinge replacement, roller swap, or a short weld on a bent frame landing in the $150 to $350 range. Larger jobs – a full gate rebuild, custom post welding, or an electric gate operator mount that needs fabrication – climb to $600 to $1,800 or more. A free on-site estimate at your property gets you a firm number instead of a guess, because a lot of what drives the price is what we find once we’re looking at the actual hardware.
Gate Parts & Welding Cost Breakdown (2026)
Here’s what Lake View Terrace homeowners and property managers are paying this year. Prices reflect local labor rates and parts availability across the northeast San Fernando Valley.
| Item / Job | Typical Price Range |
|---|---|
| Service call / diagnostic visit | $75 – $125 (often credited toward the repair) |
| Hinge replacement (per hinge, swing gate) | $85 – $180 |
| Roller or guide wheel replacement (sliding gate) | $90 – $200 each |
| Weld repair – cracked frame, broken bracket, sagging post | $150 – $400 |
| Custom bracket or mounting plate welding | $200 – $500 |
| Gate latch or lock hardware (supply + install) | $100 – $300 |
| Control board replacement (LiftMaster, FAAC, Linear, etc.) | $250 – $650 |
| Operator motor replacement (residential) | $450 – $1,200 |
| Safety loop / photo-eye sensor repair | $175 – $425 |
| Post reset or new post fabrication and welding | $400 – $1,200 |
| Full gate rebuild (frame + hardware refresh) | $900 – $2,500 |
What pushes a job toward the top of those ranges: custom fabrication, heavy steel (not standard aluminum), an operator that’s obsolete or discontinued, and access issues like a driveway too steep or tight to get equipment positioned. What keeps it low: standard parts that fit an off-the-shelf swing or slide gate, a residential-grade operator, and hardware we can source quickly from one of the nine brands we work on daily.
One thing we see come up on every electric gate job in this market – the price of the “part” and the price of the “labor” aren’t really separate. Welding on a gate frame is fine work, done in place, and it takes just as long to rehang a 200-pound gate correctly as it does to swap a motor. When you call around, you’ll get wildly different quotes because some shops quote the part and forget the fabrication and rehang time. We quote the whole job.
What Affects Gate Parts & Welding Pricing in Lake View Terrace
Every property we visit is a little different, and the price sits on these factors:
- Gate material and weight. A standard aluminum residential gate is quick to weld and reposition. Heavy wrought iron or a reinforced steel commercial gate takes longer, more heat, and heavier tooling. If you’re not sure what you have, we can tell you in a five-minute look.
- Manual vs. electric. An electric gate is a mechanical repair plus a control-system repair, and they interact. A sagging hinge can throw off the operator’s limit switches. On the flip side, getting a welded frame true again can fix what looked like a motor problem. Diagnostics on an electric setup cost more up front because there are more parts to test.
- Operator brand and parts availability. Some brands have parts on the shelf locally in Los Angeles. Others take a week or two. The nine brands we service – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – span residential and commercial, and knowing which ones share parts saves you money and shortens the wait.
- Property access and slope. Lake View Terrace sits against the Angeles National Forest foothills, and a lot of the gates here are on driveways with grade and drainage that isn’t flat. A gate on a slope puts more load on hinges, rollers, and posts. Repairs on sloped driveways often take a bit longer because the gate has to be blocked and supported while we work.
- Local fire-zone and grading realities. This is a high fire severity zone, and driveways here are often the emergency access route. If your gate is your only vehicle entry, we prioritize safety and getting you operational over cosmetic weld work. A gate that must open for emergency access doesn’t get “wait until next month” treatment.
- Permit or HOA requirements. Some properties in Lake View Terrace sit within HOA or property-manager review. If a new post location or gate design needs approval, that adds time and sometimes paperwork. We’ll flag it early so it doesn’t become a surprise.
If you want the full picture of what we handle on the repair side, our Gate Parts & Welding in Lake View Terrace page walks through the specific parts and welding services we offer. The cost page here is the “how much” side; that page is the “what exactly do we do” side.
How to Save on Gate Parts & Welding
A few practical things that keep money in your pocket:
- Get it diagnosed before it fails completely. A gate that’s grinding or dragging on one roller usually needs a $90-$200 fix. Ignore it for six months and it becomes a bent track, a broken frame, and a motor that’s been working too hard – a $900+ job. Catching it early is the single biggest savings.
- Group repairs into one visit. Our service call goes further when we’re already on site. If you know the latch is loose and the hinge is squeaking, tell us when you book and we’ll bring parts for both.
- Ask about standard-fit parts. If your operator brand shares a common control board or sensor, we can sometimes avoid a custom order. That’s a place our nine-brand range genuinely helps – the odds that we already stock or can quickly source your part go up.
- Choose repair over rebuild when it’s honest. We’ll tell you when a weld and a hinge replacement buys you another five years, and we’ll also tell you when the frame is too far gone and a rebuild is the cheaper long run. We don’t sell rebuilds for the ticket; we fix gates.
- Get a free estimate. We give firm, upfront pricing before we start, so there’s no mid-job surprises. Call (833) 696-4511 and we’ll set up a free estimate at your property.
One more: if your gate’s problem is on the electric side – the arm moves but the gate doesn’t, or it reverses partway and stops – get motor diagnostics before you buy parts. People often buy a control board they don’t need. A quick diagnostic saves the cost of a part that was fine all along.
FAQs – Gate Parts & Welding Cost in Lake View Terrace
How much does a weld repair on a gate cost in Lake View Terrace?
Most weld repairs in Lake View Terrace run $150 to $400. A small crack in a bracket or a sagging post is on the low end; a full frame crack that needs the gate taken down, welded, and rehung is toward the top. Call (833) 696-4511 for a free estimate – we can usually tell you the range from a photo and confirm it on site.
Is it cheaper to repair my gate or replace it?
Repair is almost always cheaper for the same year: a $250 weld-and-hinge job versus a $2,000+ full rebuild or new gate. The exception is when the frame is rusted through in multiple spots or the operator is obsolete and unavailable. In those cases, we’ll show you the math honestly. Diagnose first – call (833) 696-4511 and we’ll give you a straight answer.
Can you fix my electric gate if I don’t know the brand?
Yes. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we can identify most operators by looking at the control board, motor housing, or remote. That means one call usually covers it instead of you hunting down a specialist for your specific brand.
How much does a new control board cost for my gate operator?
A control board replacement in Lake View Terrace typically runs $250 to $650 installed, depending on brand and whether the board is in stock. Out-of-production boards can cost more or need to be sourced. We’ll tell you before we order – call (833) 696-4511 to get a free quote.
Do you charge for the estimate or diagnostic visit?
The estimate is free. A full diagnostic visit on an electric gate can carry a $75 to $125 service-call charge, and we credit that toward the repair if you move forward with the work. Same-day scheduling depends on the day, so call early. Reach us at (833) 696-4511.
Get a Firm Price for Your Gate Parts & Welding in Lake View Terrace
Whether you’re a homeowner dealing with a gate that won’t latch or a property manager who needs a full post-and-frame rebuild on an access-control gate, we’re a call away. We’re dedicated gate specialists – not a handyman or a fencing outfit splitting time across trades – and we work on nine major operator brands from residential-grade Ghost Controls and Mighty Mule to commercial FAAC, BFT, and DoorKing. One call covers it. For a free estimate in Lake View Terrace, call (833) 696-4511 or start from our home page.
Pricing reflects the Lake View Terrace market as of 2026. Gate Repair Lake View Terrace offers free estimates – call (833) 696-4511.
What Our Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Sofia Morales"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Vikram Reddy"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Marcy Sutton