Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Arleta
Gate repair in Arleta usually means rehabbing a 50 or 60 year old manual gate that’s dragging on concrete or pulling away from a settled post. We handle that work every week. If your gate won’t latch, sags on its hinges, or has an opener that quit, call (833) 696-4511 and we’ll send a gate technician who knows Arleta’s housing stock, not someone seeing it for the first time.
We’re based in Lake View Terrace, which puts us minutes from Arleta’s 91331 neighborhoods. That proximity means we get to your driveway fast when a gate is stuck open and your side yard is exposed. Most Arleta service calls start with a diagnosis, then a written price you approve before any wrench turns. No surprises on the invoice.
Why Gate Repair Lake View Terrace Is Arleta’s Preferred Gate Repair Company
Arleta homeowners call us because we speak the language of the neighborhood’s gates. Nearly every house between Woodman Avenue and the 5 freeway was built with a steel swing or sliding gate welded to the property line fence in the 1950s or 60s. Those gates have decades of valley sun, irrigation spray, and settling soil working against them. Our Gate Repair team has worked on hundreds of those originals, so we know what fails first and how to fix it without replacing a gate that still has life in it.
Don Donovan leads our gate work, and his approach is straightforward: identify the exact failure, explain it in plain terms, and quote a repair that addresses the root cause. Customers around Arleta tell us the same thing: the technician knew the brand on the gate, the problem was explained clearly, and the fix held up through the next Santa Ana season. That’s the standard we work to on every job.
Because we’re a gate-only shop, our vans carry parts and hardware for the operators Arleta homes actually use. We’re not making a trip back to the supply house because we guessed wrong on a hinge size or a loop detector. We arrive with what’s needed for the brands we service, which keeps your repair moving in one visit.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Sliding Gate Repair in Arleta
Sliding Gate Repair in Arleta is often a track and carriage problem rather than a motor problem. The original rolling gates on Arleta’s long side driveways were set on tracks poured into old valley concrete, and after 50-plus years of heat, rain, and soil movement, those tracks shift. A gate that once rolled smoothly starts grinding, binding, or jumping the track. Our repair work starts with assessing the track’s level, checking the rollers and carriages for wear, and realigning the gate so the motor isn’t fighting the load.
A typical sliding gate track realignment in Arleta runs $180 – $400 depending on how far the track has settled and whether new rollers or carriages are needed. If the concrete pad itself has cracked and heaved, we’ll quote re-pouring the track bed as part of the repair. That’s more involved, usually $450 – $900, but it fixes the problem instead of patching it.
Track and Roller Replacement
Original cast-iron rollers wear into flat spots, especially when a track has been out of level for years. We replace them with sealed-bearing rollers matched to the gate’s weight. Then we set the track back to level and adjust the stops so the gate travels the full opening without slamming.
Solar and DC Operators for Long Runs
Long Arleta driveways, especially off Beachy Avenue or Canterbury Avenue, often don’t have a convenient 110v outlet at the gate. We retrofit solar and DC operators on sliding gates where running mains power would mean trenching across the whole yard. The operator gets a dedicated panel and battery, and we configure the open and close limits to match the gate’s actual travel.
Wrought Iron Gate Repair in Arleta
Wrought Iron Gate Repair in Arleta usually means hinge replacement and sag correction on a heavy manual gate that’s been pulling away from its post for decades. Arleta’s original iron gates were built thick and welded hard, but the hinge posts weren’t always set deep enough for the expansive valley soil. When the post settles or leans, the gate leaf drops and starts dragging. We fix that by re-setting the post footing, replacing the hinges with the correct barrel size, and realigning the leaf so it swings freely again.
Typical hinge and sag correction on an Arleta wrought iron gate runs $250 – $500. If rust has eaten through the hinge plates or the post base, we may need to add a repair plate or re-weld the connection, which can push that to $600 – $800. Most of these jobs are one-day repairs.
Rust Repair and Repainting
Where sprinklers hit a gate for years, the bottom rails rust through. We cut out the compromised section, weld in new matching steel, and repaint to blend. In Arleta’s dry climate, the original paint on the top half of a gate often survives while the bottom six inches are gone. Addressing the rust before the gate loses structural strength is cheaper than replacing the whole leaf.
Latch and Lock Alignment
When a gate settles even half an inch, the latch stops meeting the keeper on the post. We re-hang the gate to its original height, then adjust or replace the latch so it catches solidly. Where a gate is used daily by kids walking to Canterbury Park or the bus stops on Arleta Avenue, we make sure the lock holds against a good hard pull.
Trusted Brands We Service in Arleta
We work on Viking, Ghost Controls, and DoorKing operators regularly in Arleta, along with Elite and several other major brands. Ghost Controls and Viking are common on residential gates here, especially retrofits where a homeowner added an opener to an original manual gate. DoorKing and Elite show up on longer commercial or multi-unit entrances. We stock common boards, remotes, and safety parts for these brands locally, so a bad control board doesn’t mean waiting a week for a part to ship. One call covers it.
Common Gate Repair Problems We See in Arleta Homes
- Dragging gates from settled hinge posts. Arleta’s expansive valley soils move with moisture, and original 1950s footings often sit too shallow. The gate leaf drops and scrapes concrete that was poured when the house was new.
- Track settlement on sliding gates. The concrete track beds poured in the 1960s have shifted, leaving the gate to bind on one end. Realignment and occasional re-pour work is the standard fix.
- Rusted bottom rails from irrigation overspray. Low humidity and heat dry the top, but lawn sprinklers hit the bottom constantly. The bottom rail rusts out first, right where the gate meets the post.
- Wind-twisted swing gates from Santa Ana events. Older swing gates with long leaves catch a lot of wind. Gusts push them past their stops, bending hinges and throwing off the latch alignment.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Arleta, CA
Most gate repairs in Arleta fall between $180 and $900 depending on the failure. A hinge adjustment or latch realignment typically runs $180 – $300. Sliding gate track and roller work lands at $250 – $500. Wrought iron hinge post re-setting and sag correction runs $250 – $500, and full rust repair with welding can reach $800. Complete operator replacement on an existing gate runs $1,200 – $2,600 installed. Every quote is written out before work starts, with the labor and parts itemized, so you approve the number and know what you’re paying for. Call (833) 696-4511 for a free estimate, and we’ll come out and assess your gate without charge.
We Also Serve Cities Near Arleta
Our gate technicians cover the northeast Valley beyond Arleta, including Pacoima, San Fernando, Mission Hills, and Panorama City. If you’ve got a commercial gate in San Fernando or a residential opener in Panorama City that’s acting up, the same team handles it. Let us know you’re calling from one of the neighboring communities and we’ll schedule accordingly.
Serving Arleta, CA – Our Local Coverage Area
We’re based in the Arleta area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Arleta
Dragging on an Arleta gate almost always comes back to the hinge post settling in the valley’s expansive soil, not the hinge adjustment itself. When the post footing drops, the whole gate leaf leans and scrapes the concrete. Adjusting hinges gives you a few more weeks at best. The permanent fix is re-setting the post in a deeper concrete footing with proper base material, then re-hanging the leaf. We do this work regularly and can quote it after seeing the post. Call (833) 696-4511 and we’ll assess it for free.
Yes, and it’s a common retrofit here. A properly sized solar panel and battery can run a gate opener on a long Arleta driveway without running conduit from the house. The panel needs direct southern exposure, and the battery has to be sized for the daily cycle count. We install solar-ready Ghost Controls and Viking operators on these setups regularly. Call us to find out exact panel and battery sizing for your gate’s weight and usage.
Your gate should have at least one monitored entrapment protection device: contact edges on the leading edge of a sliding gate, or photo eyes and reverse loops in the travel path. Older Arleta operators sometimes run without these, which is a safety issue, especially on gates near sidewalks or where kids play. We check all entrapment protection during every operator service call and can retrofit the right edges or sensors onto your existing gate and operator. Safety devices are not optional, and we won’t leave a gate running without them.
Almost always it can be repaired. We cut out rusted sections of the bottom rail, weld in new steel to match the profile, and repaint the affected area. The top of the gate is usually still sound because Arleta’s dry air preserves it. Replacement only makes sense when rust has eaten through most of the frame or compromised multiple structural members. The repair route is typically $400 – $800, versus several thousand for a new custom gate. Call (833) 696-4511 and we’ll give you an honest read on whether the gate is worth saving.
Repairing a derailed sliding gate starts with lifting the gate back onto the track, then checking why it came off. Usually you’ll find flattened rollers, a track that’s shifted out of level, or a bent guide where the gate enters the post. We replace worn rollers, re-level the track, and adjust the guides so the gate can’t walk off again. On Arleta’s original 1960s track beds, this often means resetting a section of track in fresh concrete. Plan on $250 – $500 for most track repairs. Call (833) 696-4511 and we’ll come out and quote it.
Call Arleta’s Gate Repair Specialists
Your gate is the first line of security for your property, and in Arleta, an open side gate on a long driveway is a real vulnerability. We’ll diagnose the problem, explain the fix, and give you a written price before any work begins. You’ll talk to a gate technician who recognizes your brand and knows this neighborhood’s gates. Call (833) 696-4511 now for a free estimate, and we’ll get your gate working right.
Written by Don Donovan, Owner at Gate Repair Lake View Terrace, serving Arleta and the northeast San Fernando Valley.