Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Arleta, CA
Gate installation in Arleta is rarely a simple swap. Most homes here were built in the 1950s and 60s with manually operated steel or chain-link gates welded to property-line fencing, so new work usually starts with careful removal, post extraction, and concrete work before the new gate ever goes in. We’re Gate Repair Lake View Terrace, a dedicated gate specialist serving Arleta with installation, repair, and electric gate work across nine major brands. Call (833) 696-4511 when you need a gate technician who knows this neighborhood’s older lots.
Why Arleta Homes Are Different
Arleta sits in the northeast San Fernando Valley on flat, grid-pattern streets where postwar stucco-and-frame ranch houses dominate. The long side driveways leading to detached garages almost always have a steel swing or sliding gate at the curb line, and most of those gates date to the original construction. That means we’re working with metal that has survived sixty-plus summers above 100°F, Santa Ana wind events, and decades of irrigation spray hitting the lower rails. The gate posts are typically set directly into old valley concrete or block walls, so when a gate sags or drags, the problem is almost never just the hinges. We routinely find the post base has rotted or the concrete pad under a sliding gate track has settled and cracked.
The local climate creates specific failure patterns. The hot, dry air bakes paint off steel, and where sprinklers reach the gate, rust accelerates fast. Wood gates that were common on some 1950s Arleta lots are now cracked and warped from decades of sun. Vinyl gates fade and turn brittle. Wind gusts during Santa Ana events twist older swing gates out of alignment, which is why a gate that worked all winter can suddenly bind in September. Tight side yards also mean clearance is limited, so gate leaves often need to be sized and hung to swing inward over the driveway rather than outward toward the street.
Most Arleta properties have no HOA, so gate changes are governed only by Los Angeles city setback and height rules. That gives homeowners more freedom than in newer planned communities, but it also means we regularly see gates built decades ago without current clearances from power lines, gas meters, or utility access points. When we install or repair, we check those clearances as part of the job.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Arleta Services
Two services cover most of what Arleta homeowners and property managers call us for: mechanical gate repair for older manual gates, and electric gate repair for automated systems that have stopped responding.
Gate Repair in Arleta
Most Arleta repair calls involve a 1950s or 60s-era steel gate whose post has settled in the expansive valley soil. The classic symptom is a gate that has dropped and is now dragging on the driveway concrete, leaving scrape marks or refusing to latch. We re-hang sagging gates by pulling and resetting posts, rebuilding post bases, replacing rusted hinges and rollers, and re-leveling tracks set in aging concrete. Because the original gates were welded to fence lines on tight lots, it’s often faster and cheaper to repair in place than to replace the leaf. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule hardware. Gate Repair in Arleta covers what a full diagnosis includes.
Electric Gate Repair in Arleta
When an automatic gate in Arleta stops opening, the cause is usually not the motor. Heat and dust shorten control board life, loop detectors drift out of calibration after heavy rain or irrigation shifts, and safety edges crack in the sun. We troubleshoot motors, boards, photoelectric sensors, remote receivers, and the wiring between them before replacing any part. For systems originally installed in the 2000s and 2010s, we often find brand-specific failure patterns we recognize immediately. Electric Gate Repair in Arleta explains common faults by brand and symptom.
Gate Installation in Arleta
Gate installation in Arleta means working around sixty-year-old post holes, tight side yards, and concrete that has moved. Most new installations start with removing the old gate and posts, breaking out the old footing, pouring a fresh base, and only then hanging a new gate that fits the existing fence line. We install residential and commercial gates for driveways, side yards, and pedestrian entries, including automatic systems from Viking, Ghost Controls, DoorKing, and Elite. For a full look at what we install, see Gate Installation.
Automatic Gate Installation
Signs you need it
Your current gate is manual and you’re tired of getting out of the car, or an old automatic opener has failed beyond reasonable repair and you want a new operator matched to your existing gate.
What it costs in Arleta
Automatic gate installation in Arleta typically runs $1,400 to $2,800 depending on gate weight, operator brand, and whether the existing post can support the new hardware.
How we do it
We mount the operator to a reinforced post or pad, run low-voltage wiring in conduit, install and calibrate safety loops or photoelectric edges, then program remotes and keypads.
Gate Installation Services
Signs you need it
The existing gate leaf is rusted through at the bottom rail, the posts lean, or the track is so deformed that repairs would cost more than a new installation.
What it costs in Arleta
Basic gate installation services in Arleta, including a new steel or aluminum gate leaf hung on existing posts, usually run $850 to $1,700.
How we do it
We verify post condition, fabricate or order a correctly sized leaf, re-set or reinforce posts as needed, and hang the gate with new hinges, rollers, and a working latch.
Electric Gate Installation
Signs you need it
You want your gate automated from the start, with the motor, control board, and safety devices designed into the installation rather than retrofitted onto an existing manual gate.
What it costs in Arleta
Electric gate installation in Arleta starts around $1,400 for a single-leaf swing gate and can reach $3,500 for a heavier slide gate with intercom and keypad access.
How we do it
We build the gate and operator as one system, running protected power to the motor, setting the open and close limits, and testing the reversal and obstruction detection before we leave.
Driveway Gate Installation
Signs you need it
Your driveway has no gate, or the existing one is too narrow for your vehicles and you want a wider opening that doesn’t foul the sidewalk or utility boxes.
What it costs in Arleta
A new driveway gate installation in Arleta is typically $1,200 to $2,900 for a steel swing gate with proper posts and hinges.
How we do it
We set new posts below the frost line in concrete, fabricate the gate to your opening width, and account for the driveway slope so the gate swings freely at both ends.
Sliding Gate Installation
Signs you need it
You don’t have room for a swing gate to arc open, or you prefer a cantilever or track-style slide gate for a wider commercial or side-yard opening.
What it costs in Arleta
Sliding gate installation in Arleta is generally $2,000 to $4,000 depending on gate length, track or cantilever hardware, and the condition of the concrete pad.
How we do it
We pour or repair the track base, set the guide posts, install the slide hardware, and adjust the rollers so the gate travels straight without binding.
What Gate Installation Costs in Arleta
| Item | Typical range in Arleta |
|---|---|
| Automatic gate installation | $1,400 – $2,800 |
| Gate installation services (new leaf, existing posts) | $850 – $1,700 |
| Sliding gate installation | $2,000 – $4,000 |
Do you handle the old gate removal and the concrete work?
Yes. We remove the old gate and posts, break out the existing footings, and pour fresh concrete before setting new posts. The price you approve before we start includes that prep work.
Can you install an automatic opener on my existing Arleta gate?
Usually, yes. We check the gate weight, post steel thickness, and available power first. If the structure is sound, we mount the operator and run wiring without replacing the gate.
Brands We Service in Arleta
We service gate operators and hardware from Viking, Ghost Controls, DoorKing, and Elite, along with five other major brands. Because we carry common boards, remotes, and safety parts for these systems on our trucks, most Arleta calls are resolved in one trip rather than two. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Arleta, CA
| Service | Typical range in Arleta |
|---|---|
| Automatic gate installation | $1,400 – $2,800 |
| Gate installation services (new leaf, existing posts) | $850 – $1,700 |
| Electric gate installation | $1,400 – $3,500 |
| Driveway gate installation | $1,200 – $2,900 |
| Sliding gate installation | $2,000 – $4,000 |
| Gate repair (mechanical) | $150 – $450 |
| Electric gate repair | $200 – $600 |
| Gate opener install / replacement | $650 – $1,400 |
What pushes Arleta prices higher than the Valley average is the age of the posts and the condition of the surrounding concrete. A gate that has been settling for forty years needs more prep work than one hung five years ago. Every job is quoted in writing before we start, and the number we agree on is the number you pay.
Neighborhoods We Serve in Arleta
We cover all of Arleta within the 91331 ZIP code, from the streets around Branford Park up to the 5 freeway edge and across the flat residential blocks between Woodman and the Pacoima border. Most calls come from the long-driveway ranch homes north of Osborne and from the side-yard gates common near Canterbury Avenue.
- Branford Park area
- Canterbury Avenue corridor
- Beachy Avenue blocks
- Arleta Avenue side streets
- Osborne Street area
Service Area – Cities Near Arleta
We regularly work in the communities surrounding Arleta, so if you’re just over the border, give us a call. We serve Pacoima, CA to the north, San Fernando, CA to the northeast, Mission Hills, CA to the northwest, and Panorama City, CA to the south. Same-day response is available across this part of the northeast Valley.
Serving Arleta, CA – Our Local Coverage Area
We’re based in the Arleta area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Arleta
We can usually reach Arleta homes the same day, and for a gate that is stuck open or won’t secure, we treat it as urgent because the property is exposed. A gate that won’t close is a security problem, not just an inconvenience. Call us at (833) 696-4511 and we’ll give you a real arrival window.
For a like-for-like gate replacement on existing posts in Arleta, no permit is typically required. If you’re adding an automatic opener or changing the gate to a taller or wider configuration, Los Angeles city rules around setbacks and height may apply, and we’ll flag that during the estimate.
We often work with homeowners who want to keep the original look of their postwar steel gate. We can replace the bottom rails, re-use the original scrollwork where it’s still solid, and match new steel to the old proportions. When the leaf is too far gone, we fabricate in a compatible style.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically the same day.
- 4You approve before work beginsNothing starts until you say go.
What Arleta Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Sofia Morales"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Vikram Reddy"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Marcy Sutton