Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGhost Controls Gate Repair in Sunland, CA
If your Ghost Controls gate operator has stopped mid-swing or the battery dies within days of a full charge, we can usually diagnose it in one visit. We service Ghost Controls swing and slide operators throughout Sunland, including the canyon-side streets off the 210 where wind loading and heat cycling tear through lightweight hardware faster than anywhere on the valley floor. Call (833) 696-4511 and we’ll get a Ghost Controls technician out to your Sunland property.
We’re an independent Ghost Controls service provider, not a manufacturer-authorized dealer. That independence means we stock OEM-compatible boards, arms, and harnesses, but we’ll also tell you plainly when a wind-rated re-motor makes more sense than another board swap. Sunland’s 91040 and 91041 zip codes are our home territory, and we know exactly what a Santa Ana gust does to a standard-duty Ghost Controls arm on a long hillside driveway.
Why Sunland Residents Choose Us for Ghost Controls Service
When a Ghost Controls operator quits on a Sunday evening and your gate is stuck open across a Sunland driveway, you don’t want a technician who’s going to Google the model number on site. You want someone who has already opened a dozen TDS and DTP series units in this exact climate. That’s what we bring. Don Donovan, our owner, grew up in Lake View Terrace and spent two-plus decades working on residential and commercial gate systems across the San Fernando Valley before founding Gate Repair Lake View Terrace. He’s the kind of technician who can diagnose a Ghost Controls control-board fault by the pattern of the LED blinks before he even pulls the housing off.
We carry OEM Ghost Controls boards, arms, and battery harnesses for same-day replacement on most Sunland calls. When the gate itself needs hinges, rollers, or a new post anchor, we use quality aftermarket hardware that’s sized for wind exposure, not just the cheapest stamped steel on the shelf. One call covers everything from the motor to the hinge bolts.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Common Ghost Controls Gate Repair Problems We Solve in Sunland
- Control-board and relay failure after brownouts on canyon circuits. Sunland’s hillside power feeds sag during heavy demand and dip when winds take lines out. A Ghost Controls board that sees repeated voltage fluctuation will eventually fault out mid-cycle and refuse to reset. We replace the board and often add a surge-rated inline protector so the next brownout doesn’t cook the new one.
- Sheared operator arms and stripped hinge bolts from Santa Ana gusts. If your Ghost Controls swing kit was sized for a sheltered lot, a 40 mph gust off the canyons can slam the leaf against the stop and shear the arm clean off. We see this constantly on Sunland’s exposed frontages. The fix involves a new OEM arm, re-set hinges, and usually a heavier stop or a wind-rated operator so it doesn’t happen twice.
- Battery and solar-charge faults from heat cycling. Ghost Controls battery-backup and SolarSync packages sit inside sun-baked plastic or metal enclosures. After a few Sunland summers, that heat degrades the battery chemistry and the charge controller drifts. The result is a unit that reads full charge at dusk and dies by morning. We replace the battery pack and reposition or vent the enclosure so it stops cooking itself.
- Dust and grit intrusion into slide tracks and limit switches. Long gravel or decomposed-granite driveways in Sunland kick fine dust into Ghost Controls slide operator tracks. That grit packs into the limit switch contacts and the drive chain, causing the gate to stall short or overshoot the open stop. We clean the track, replace the limit switch if it’s pitted, and install a brush seal where the dust is worst.
- Dual-swing kits losing sync on paired arms. The Ghost Controls TDSE and TDS2 dual-arm kits rely on coordinated controller timing. When one leaf takes more wind load than the other, the controller fights itself and the gate stutters or reverses. On Sunland canyon properties with uneven wind exposure, we often spec a heavier operator on the wind-loaded leaf to bring the system back into balance.
Ghost Controls Service in Sunland: What Local Conditions Mean for Your Equipment
On the canyon-side streets off the 210 in Sunland, a gate can face a wind-exposed frontage across a long, unblocked driveway, so the operator sees continuous gust loading rather than the sheltered conditions most valley-floor installs get. That changes the repair calculus. A Ghost Controls standard-duty swing kit that works fine in Sherman Oaks will shear its arm or strip its hinge bolts on a Sunland hillside within a season or two. We see the same pattern on homes near the wash corridors where afternoon gusts funnel through. When a homeowner off Orcas Avenue or one of the canyon-adjacent streets calls because their Ghost Controls dual-swing kit faulted after a wind event, we don’t just replace the broken part. We look at the frame weight, the post anchors, and whether the operator was ever rated for that exposure in the first place. More often than not, the fix that lasts is a heavier frame or a wind-rated Ghost Controls operator, not another board.
A few years back, on a canyon-side property off the 210 in Sunland, a homeowner’s Ghost Controls dual-swing kit had one arm sheared and the controller faulting after an afternoon of gusts slammed the gate against its stops. We replaced the sheared arm with an OEM Ghost Controls unit, re-set the hinges and post anchor on the wind-loaded leaf, and added a heavier stop so travel couldn’t overshoot. The gate now cycles cleanly through a gust cycle instead of tripping the controller. That’s the difference between patching a symptom and fixing the Sunland-specific cause.
Ghost Controls Models & Products We Service in Sunland
We work on the full Ghost Controls residential lineup: the Heavy-Duty Single Swing TDS series, Standard Duty Single Swing DTP and DTM operators, Dual Swing TDSE and TDS2 paired-arm kits, and the SolarSync and battery-backup solar packages. For control logic, we match OEM Ghost Controls boards, arms, and battery harnesses, because the operator’s behavior depends on those components talking to each other correctly. For the gate structure itself, hinges, rollers, posts, and frames, we use quality aftermarket hardware selected for the wind and heat conditions in Sunland’s 91040 and 91041 hillside lots. We keep the most common Ghost Controls boards and arm assemblies in local stock, so a Sunland repair call doesn’t turn into a week of waiting on a shipped part.
Not sure which Ghost Controls model you have? The model number is on a label inside the operator housing. If the housing is cracked or the label is faded, our techs can identify the unit by the board layout and arm design. We’re familiar with every Ghost Controls generation that’s been installed across Sunland in the last fifteen years. For broader Ghost Controls coverage, see our Ghost Controls sales & service page.
See the difference
Before
After
Before
After
Before
AfterGhost Controls Service Pricing in Sunland
Ghost Controls gate repair in Sunland typically runs between $180 and $340 for most single-component failures, like a control board, an arm, or a battery harness. Dual-swing kits and jobs that require a full operator re-mount or wind-rated re-motor can push higher, and we’ll always give you the number before any work starts. The price is quoted and agreed before we touch the gate, and a free estimate comes with every repair visit.
What drives the Sunland price is the same thing that drives every hillside gate job: access, exposure, and whether the previous install was ever sized correctly. A flat driveway at grade is a straightforward swap. A canyon-side post that needs re-anchoring because the wind has been working on it for a decade takes more time and materials. Call (833) 696-4511 for an exact quote before you decide anything.
Serving Sunland, CA – Our Local Coverage Area
We’re based in the Sunland area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs – Ghost Controls Gate Repair in Sunland
When sustained gusts hit a lightweight swing or slide gate, the operator’s current draw spikes as the motor fights the wind load. If that draw exceeds the board’s limit, the controller faults and the operator shuts down. On Sunland’s canyon-side lots, the problem compounds when hinges and post anchors have loosened from repeated cycling. The fix usually involves tightening or replacing the hardware, then verifying the operator is actually rated for your gate’s wind surface. If it isn’t, a wind-rated Ghost Controls unit is the honest answer. Call (833) 696-4511 and we’ll check the whole system.
Heat cycling inside a sun-baked enclosure degrades the battery chemistry faster than the charge controller can compensate. A Ghost Controls SolarSync or battery-backup package sitting in direct Sunland sun can drop to a few days of standby from a full charge within a couple of seasons. We replace the pack and usually add a vented or shaded enclosure so the replacement doesn’t die the same way.
Sometimes, but only if the gate leaf itself is light enough to stay within the operator’s rating. A Ghost Controls standard-duty DTP kit driving a heavy wood gate on a long wind-exposed Sunland driveway is a repeated failure waiting to happen. We’ll weigh the leaf, measure the wind surface, and tell you whether a Heavy-Duty TDS series or a re-framed lighter gate is the realistic fix. The quoted price always comes before any work.
Yes. We handle the access side of Ghost Controls systems on Sunland properties, including wireless keypads, intercom modules, and the smart-access hardware that ties into the operator board. Hillside installs often have the entry hardware mounted on a pedestal or stone column, and the wiring can degrade faster from heat. We trace the circuit, replace what’s failed, and get the access working with the operator.
Fine dust and decomposed granite from long Sunland driveways pack into the track and the limit switch contacts. The gate then stalls short because the motor can’t push through the packed grit, or overshoots because the limit switch stopped registering the stop position. We clean the track, replace pitted limit switches, and install brush seals where the dust intrusion is worst. For a specific quote on your setup, call (833) 696-4511.
Service Areas Near Sunland
We cover Sunland and the surrounding foothill communities, including Sunland service area neighborhoods off Foothill Boulevard, Lake View Terrace, Shadow Hills, and Tujunga. We also run calls into Sun Valley and Pacoima for Ghost Controls owners closer to the 5 corridor. If your gate is on a canyon-edge lot just outside Sunland proper, ask us. For neighbors to the east, see our Ghost Controls service in Tujunga page, and for the west side, Ghost Controls service in Pacoima covers that area.
Book Your Ghost Controls Service in Sunland Today
A Ghost Controls gate that’s dead or stuck open is a security issue, not just an inconvenience. If the gate isn’t working, there’s a reason – and once we find it, the fix is straightforward. Call (833) 696-4511 today for a free estimate, and we’ll get a Ghost Controls specialist out to your Sunland property fast.
Written by Don Donovan, Owner at Gate Repair Lake View Terrace, serving Sunland and the northeast San Fernando Valley foothills.